Find the tool you need.

ISG1200

Shrink Unit ISG1200

The ThermoGrip® ISG 1200 is BILZ's entry-level induction shrink unit: shrink parameters are entered easily by scanning a barcode, and energy-saving induction technology is used. It consumes 20% les…

ISG3460

Shrinking device ISG3460

The ISG3460 offers professional, automated shrinking with an integrated pneumatic screw-in device for ThermoGrip® TMG. Shrink chucks are cooled and then dried fully automatically.

ISG4600

ThermoGrip® Shrinking device ISG4600 evolution

The ThermoGrip® ISG 4600 evolution automatically detects the tool geometry, adjusts the iris coil and selects the optimum process parameter; shrinking, cooling and drying are combined in one fully …

T

Standard Shrink Chucks

BILZ standard shrink chucks offer optimum stability thanks to "Balanced by Design" followed by fine balancing, making them ideal for HPC/HSC machining. The patented countersink allows the tool to b…

TSF

Slim Shrink Chucks

TSF slim shrink chucks have a 3° tapered outer contour to reach deep cavities in mould making and are used for induction clamping of carbide tools. They combine a small interference contour with hi…

THD

Heavy Duty Shrink Chucks

THD heavy-duty shrink chucks offer up to 50% more overlap, making them suitable for HPC machining. Increased wall thickness and a short, rigid design help prevent vibration even at high speeds.

TMG

ThermoGrip TMG

ThermoGrip TMG can clamp tool shanks of almost any diameter with a single basic shrink chuck; the constant maximum overlap between tool and chuck ensures consistently high clamping force. A pull-ou…

GNCK

Self Reversing Tapping Attachment GNCK

Thanks to its integrated reversing gear, the GNCK self-reversing tapping attachment eliminates the need to reverse the machine spindle, saving 200–400 ms per thread and consuming less electricity.

S3D

S3D Synchro

The S3D synchro tapping chuck provides minimal length compensation in compression and tension on machines with synchronous feed; it compensates for synchronisation errors, improving thread quality …

Nano Synchro

Nano Synchro is a synchro tapping chuck with minimal tension/compression compensation for electronics, optics, precision engineering and toolmaking applications. Ball-bearing technology and optimis…

WFLC

Quick Change Tapping Chuck WFLC

The WFLC quick-change tapping chuck (compensating chuck) is used for tapping and thread forming on machining centres, transfer lines, special-purpose, drilling and milling machines. It features an …

WHPMC

Hi-Power Milling Chucks

BILZ hi-power milling chucks deliver very high clamping force with low friction thanks to double clamping over a wide clamping range and a roller-bearing design. Reduced vibration results in excell…

WHPMC

Slim Hi-Power Milling Chuck

Thanks to its slim design, the slim hi-power milling chuck reaches deep areas without interference while remaining powerful and rigid. The non-slotted clamping nut makes use at high speeds easier.

WHEC

Hydraulic Expansion Chucks

WHEC hydraulic expansion chucks offer torque transmission far above that of conventional collet chucks and vibration-damped tool clamping. Thanks to their temperature-resistant design, clamping for…

Super Collet Chuck

The Super Collet chuck offers integrated runout accuracy in a compact design for high-speed spindles and general milling. The clamping force acts perpendicular to the tool axis and provides twice t…

BTC I

Presetting Unit BTC I Starter

BTC I Starter is an easy-to-use, entry-level tool presetter that can be put into operation quickly after brief training; it rapidly measures, presets and checks tool length and diameter. The Z and …

BTC II

Presetting Unit BTC II Allrounder

BTC II Allrounder is a presetter designed for higher throughput; it rapidly measures tool length, diameter, radius and two cutting angles. For quality control, the cutting edge is inspected under i…

TDSc

Data Carrier TDSc

The TDSc data carrier is a compact RFID chip that enables unambiguous identification of all tools and components in the UHF range. No adhesive is required; it clips into a chip bore to DIN ISO 7388…

BIMS

Intelligent Measuring System BIMS

The BILZ BIMS intelligent measuring system provides process monitoring in machining and can be adapted to the requirements of the cutting process. The system can be integrated into the machine tool…

HPC01

HPC01 Rougher 35/38P

The HPC family delivers high surface quality in roughing and finishing for processes demanding maximum productivity; HPC P is designed especially for high-alloy steels and cast iron. Micro edge pre…

TPC01

TPC01 Rougher 45 P (3xD)

The TPC (Trochoidal Performance Cutter) range was developed for excellent trochoidal milling across a wide range of materials. Benefits: reduced wear, vibration damping and clean, smooth surfaces.

Multiface P45 PRO8 (Arbor)

MultiFace P45 PRO8 is a positive face milling system for low power consumption; the 15° rake angle reduces cutting forces. Its grades and coatings ensure long tool life and high metal removal rates.

MultiEdge 2Feed mini (Screw-On)

MultiEdge 2Feed mini is an indexable milling cutter designed for roughing small and medium-sized parts, achieving high metal removal with a high-feed strategy. It can be used in steel, cast iron, s…

EASYTap Blind Hole (Type M-6HX)

The EASYTap series combines high flexibility and productivity in a single product family and can be used in almost all materials. Long tool life in steel, stainless steel, cast iron and aluminium e…