Easytec Inserts with Special Profile

MRM

CNMG 120408-MRM

The MRM geometry is a new insert geometry added to the Boehlerit ISO turning range for medium to rough turning of stainless materials. A deeper rake angle reduces cutting forces, increasing process reliability and extending tool life in high-hardness stainless steels.

LC415Z

Supertec LC415Z

With its micro-grain substrate, the Supertec LC415Z turning grade provides both a sharp micro geometry and edge stability. The high-temperature-resistant, extremely smooth supernitride coating delivers high cutting speeds and long tool life in superalloys.

Microtec

Microtec is an internal machining tool with an additional holder for turning small and narrow bores; it consists of a clamping body and a boring bar. Because the bar can be replaced without removing the entire holder, insert changes are easier and faster.

Easytec

Easytec enables reliable grooving and parting-off of shafts, bars and tubes. Single- or double-edged parting inserts fit the same holder, reducing setup times and tool magazine occupancy.

Quattrotec

Thanks to the special design of its body, the Quattrotec tool system performs four operations with a single tool and low vibration: drilling into solid material (including off-centre), internal turning, face turning and longitudinal turning. In the EasySafe system, a notch under the insert ensures that the insert is seated in the pocket quickly and 100% correctly.

S-Tool Holder for Internal Machining with Coolant

The new S tool holders with internal coolant feature a chip flute optimised for internal turning and a modified WF dimension that allows smaller minimum bore diameters.

LCP25T

Steeltec LCP25T

LCP25T is a universal steel turning grade for the ISO P25 application range; the new gradient carbide provides high machining reliability across a very wide range of steels. The patented Nanolock TiCN bonding layer bonds the harder Alpha-Al2O3 layer to the patented Yellow-Al2O3 layer.

FN

FN Geometry (BCN10T / BWN10T)

Thanks to its chip breaker extending up to the corner radius, the newly designed FN geometry ensures chip breaking even at small depths of cut. It is available in grade BCN10T for alloyed aluminium and non-ferrous metals, and BWN10T for low-alloy aluminium.