Thread Turning Inserts – Performance Line

Drilltec

The Drilltec indexable insert drill offers high cutting speeds and feed rates, a high metal removal rate and superior drilling quality. Since 4 cutting edges can be used, it is extremely economical and provides long tool life.

BCU20T

BCU20T

BCU20T is a new TiAlN-coated ultra-fine-grain grade for thread turning and is very well suited to general use. It offers excellent fracture toughness even under difficult conditions; directly pressed ('BD') threading inserts have also been added to the range.

HELIX

Rolling Systems Type HELIX

Boehlerit offers thread rolling systems worldwide (excluding Germany) under a sales partnership with Wagner Tooling Systems; HELIX axial rolling systems have a compact design with large roll diameters. Rolling produces high-strength, dimensionally accurate threads without interrupting the grain flow in the metal.

BA05 · BA60

A-Line Universal Machine Taps

A-Line is a universal machine tap series made of HSSE; it is available for through and blind holes in metric, metric fine, G (BSP), UNC and UNF threads.

BP05 · BP60

P-Line Performance Taps

P-Line is a high-performance machine tap series made of HSSE PM; it is available for through and blind holes, and the metric BP05 and BP60 types are offered with and without coolant supply.

BC70 02 · BC70 05

C-Line Cold Forming Taps

C-Line are machine thread-forming taps made of HSSE and HSSE PM for through and blind holes; BC70 02 is the metric universal version, while BC70 05 is the metric performance version with and without coolant.

S190 · S191 · S193 · S194 · S195

S-Line Round Dies

S-Line is a series of round dies (Schneideisen) made of HSS and HSSE; it is available for metric, metric fine, G (BSP), UNC and UNF threads.

3D · 5D · 8D · 12D

Solid Carbide Drills 3D – 12D

Boehlerit VHM (solid carbide) twist drills are TiAlN-coated with a 140° point angle; they are available for drilling depths from 3D to 12D, in versions with internal coolant (MIK) and without internal coolant (OIK).

ECO Line

Thread Turning Inserts – ECO Line

ECO Line is a thread turning insert series offering an economical solution without compromising on quality; it is available for external and internal threads in partial profile and various full profile standards.

NL.. · AL.. · BPSC..

Tool Holders for Thread Turning

A range of tool holders (toolholders and boring bars) for external and internal machining with Boehlerit thread turning inserts; external toolholders are available in right-hand and left-hand (LH) versions.

RS10 · RS16 · RS22-2 · RS27/56 · RS45

Axial Rolling Systems RS

Wagner axial thread rolling systems produce threads of the highest quality and surface finish in short cycle times; fast and easy changing of roll holders provides wide working ranges, and the tools are suitable for stationary or rotating use.

B8-W · B10-W · B11 · B13 · B14 · B16 · B19

Tangential Rolling Systems

Wagner tangential thread rolling systems are mounted on the tool carrier (e.g. turret disc) via an adapter and produce threads with high surface quality within seconds; they are available in different sizes for workpieces from Ø 1.6 – 52 mm.

TSW8 · TSW10 · TSW18 · TSW24 · TSW24-SR · TSW50

TSW Knurling Systems

The Wagner TSW tangential knurling system enables time-saving rolling of profiles, parallel grooves, knurls and beads; it works preferably on single- and multi-spindle lathes with a stationary tool while the workpiece rotates.