EASYReam Modular Body 3xD

EASYDrill Solid 5xD

The EASYDrill solid carbide drill with internal coolant is ideal for all common drilling operations; in addition to flat surfaces, slightly inclined entry and exit surfaces can also be drilled. It is used universally in steel, stainless steel, cast iron, aluminium and high-temperature alloys.

EASYReam Solid (Through Hole)

EASYReam reamers can be used universally for steel, stainless steel and cast iron; thanks to two cutting material options they are also suitable for non-ferrous metals such as aluminium. They offer excellent bore quality and surface finish with maximum tool life.

EASYReam Modular Head (Blind Hole)

Thanks to its modular holder, EASYReam Modular enables finishing in both blind and through holes. The solid carbide cutting part can be reground more often; unequal tooth spacing reduces vibration.

68-900

68-900 - PCD 8 Facet Drill

The PCD 8 facet drill performs well in composite materials that require long tool life and delamination-free holes. Drill diameters are made oversize so that aircraft fasteners can pass through the holes.

86-150

86-150 DFC Aerospace Composite Drill

The carbon fibre reinforced plastic (CFRP) drill produces clean, close-tolerance holes without fraying or delamination; high-quality point grinding cuts the fibres at hole entry and exit, preventing delamination. The improved diamond coating protects the cutting edges and reduces tool changes.

85-800

85-800 Solid Carbide CFRP Drill (Metric)

The CFRP drill is designed to ensure hole quality and diameter; the "W" point centres the drill, and the peripheral cutting edges cut the material to produce close-tolerance holes without fraying or delamination. The drills are DLC (diamond-like carbon) coated.

72-000

72-000 - Solid Carbide Boring Bit Brad Point (Right Hand)

The Brad Point drill is designed for drilling blind holes; thanks to its special W-shaped face geometry, it cuts the outer periphery first, preventing fraying at the top edge and leaving a clean surface edge.